Mobilizing a Dust Collector Part Two

In this previous post, I had started mobilizing an old, wall-mounted, Oneida cyclone system. I have now been using the system for a few weeks and an update is in order.

The above photo shows

What I Did on Summer Vacation 2020

On Friday I got home from my place near Rib Lake, Wisconsin. Since the autumnal equinox happened during the last few days of the trip, technically we can call it a late-summer visit to the woods. Temperatures were warm for September. A few nights were cool enough that I was comfortable inside my shack with a fire in the stove, but most nights were fine to sleep outside in the hammock.

Despite the warm temperatures, the sun was no longer high in the sky, as in July. Daylight hours are shorter, and the leaves turned color while I was there. Early on there were patchy bits of color here and there:

. . . but by the time I left we had sights like

Videos Worth Watching: "Medieval Wood Riving"

https://www.youtube.com/watch?v=BE2klxBE8QM

A museum team in Sweden shows excellent axe techniques for felling, bucking, riving and hewing as they duplicate 40-foot-long rafters in a medieval Swedish church.

The segment on controlling the riving is my favorite. Early in the video you can see that the tree used for the original rafters has considerable twist, and the crew shows how to overcome that.

Lately I've been following the "Finnish Vintage Axes" account on Instagram, and  now I see what all those long-headed axes are for. It also looks like "mortising" axes have a more general use during the controlled riving.

The best woodworking videos give me an itch to get busy. This one does that, in spades!

Stacked Birch Bark Knife Handle: New Video

I recently made and posted this video to YouTube: 

https://www.youtube.com/watch?v=Q2zDllohj-Q

The process of making the handle was quite enjoyable, and the result is wonderful. The handle is grippy, resilient, and warm in the hand. Even when wet! I will be making more.

Splitting Wood into Thirds

Oh, yes you can!

There are three points to this post:

More Adventures in Workholding

I've been working on a change to my spoon-carving process, scooping out the bowl earlier in the process with the blank held by a clamp rather than in my hand. 

I tried it out with this tiny salt spoon, made from

Spoon Blanks by Hammer and Chisel (Without a Hatchet!)

Unrefined spoons, just captured in the wilds of northern Wisconsin!

Let's say you have

Video Worth Watching: Wille Sundqvist on YouTube

My teacher Drew Langsner has posted a video I love on YouTube. On several of my visits to Country Workshops, I have watched this on a VHS copy Drew has in the shop's video library. 

This is basically raw, unedited footage made in 1982 by Rick Mastelli for a projected video by Taunton Press. For reasons I don't know, the project wasn't completed. I believe several black and white stills from these sessions were used in a Fine Woodworking article on the basic knife grasps.

I assume this was Wille's second trip to the U.S., when he taught the first spoon and bowl course at Country Workshops. Here you see a craftsman at the height of his powers, working in a new environment and explaining what he's doing and why in his second (third?) language. Clearly he's a master of both the work and teaching it.

Along with Wille's book, Swedish Carving Techniques, and the later Taunton video by his son Jögge, this video will give anyone interested in carving with hand tools, beginner or more advanced, plenty of food for thought. I still have new "aha" moments every time I look these over. Wonderful "ahas" I feel not just in the brain, but in the hands: one of life's great pleasures!

More Spoon Carving: Red Maple Serving Spoons

Here are photos of two spoons I made at my

If You Can't Start at the Ending, Repeat: One Lesson from Drew Langsner

Several years into my professional woodworking life, I read an older man's account of being hired on at

Carving Spoons

Here are a few spoons I've completed recently. Most have some areas that are sanded, many have some areas that are knife-finished. One thing I'm learning is that even if I plan to sand the spoon, sanding time is cut way down if I do some careful finishing knife work after the spoon is thoroughly dry. (I guess I assume you know that it's easiest to do most of the carving while the wood is as wet as possible).

All of these spoons are finished with raw flax oil.

The spoons pictured are spoken for by their new owners. Others will be available in the weeks to come; watch this blog for news on that.

Drying Wood in the Microwave: or, the Cursed Spoon

Three rounds of 30-second exposures in the microwave oven, with a few minutes outside in between to cool off, will dry most spoons enough to be ready for finish sanding and oiling. And that would have worked for this spoon too! But nothing about this spoon was easy. It probably shouldn't even exist. It resisted being created at almost every step of the way. And I refused to listen.

Spoons in January

From this:

To this:

In just a couple of hours.  Making spoons out of wood you cut down yourself is about as close to instant gratification as you find in a woodworking project.

A Handplane Jig for Ladderback Chair Leg Tapering

Here's another hand tool jig. This one is more specific than the dovetail paring jig I showed in the last entry, because it's built to help with one particular step in one particular project. I use it to turn tapered square chair leg blanks into tapered octagons when I make the ladderback chair developed by J. Alexander and Drew Langsner. The dovetail jig can be used for joints of different thicknesses and widths, and I can even picture myself using it to fair up tenon shoulders. But this leg-tapering jig is so specific that I doubt it will ever be used for anything but this project.

First I'll show about making and using the jig, and then I'll explain my thinking a little bit.

Make a Chopping Block for Green Woodworking

If you want to get started in woodworking on the lowest possible budget, I recommend what's called “green woodworking” or sometimes “greenwoodworking”. I've talked a little about this already, in this entry about the chairmaking class I took at Country Workshops last summer, and this entry about gathering some ash for my next chair.

One thing you will find handy if you want to start carving spoons and/or bowls from green wood is a chopping block, so you'll have a stable surface for shaping with an axe.

Another Use for 1-2-3 Blocks

I improvised a scribing tool out of a 1-2-3 block, an eye screw, and a pencil yesterday. It's not ground breaking, but it's a nice piece of frugality making use of something I've recommended you buy back in this earlier post. Make the tool or not; notice the method for stopping your chairs from rocking shown in the final photos.

The Toolkit

I mentioned in my last post that you don't have to be interested in making a ladderback chair to take notice of the tools we used at Country Workshops, or to make use of green wood. For the woodworker on a budget, wood from retail sources can be expensive. So, in many cases, you might want to consider splitting logs into useable wood and drying it yourself.

Ladderback Chairs: Refined Results from a Minimal Toolkit

From this:

To this:

 in 6 days. [Part One of Two]